Skip to content

TLS

Transport Layer Security

Certificates Definition

Automated

See the Let's Encrypt page.

User defined

To add / remove TLS certificates, even when Traefik is already running, their definition can be added to the dynamic configuration, in the [[tls.certificates]] section:

# Dynamic configuration

tls:
  certificates:
    - certFile: /path/to/domain.cert
      keyFile: /path/to/domain.key
    - certFile: /path/to/other-domain.cert
      keyFile: /path/to/other-domain.key
# Dynamic configuration

[[tls.certificates]]
  certFile = "/path/to/domain.cert"
  keyFile = "/path/to/domain.key"

[[tls.certificates]]
  certFile = "/path/to/other-domain.cert"
  keyFile = "/path/to/other-domain.key"

Restriction

In the above example, we've used the file provider to handle these definitions. It is the only available method to configure the certificates (as well as the options and the stores). However, in Kubernetes, the certificates can and must be provided by secrets.

Certificates Stores

In Traefik, certificates are grouped together in certificates stores, which are defined as such:

# Dynamic configuration

tls:
  stores:
    default: {}
# Dynamic configuration

[tls.stores]
  [tls.stores.default]

Restriction

Any store definition other than the default one (named default) will be ignored, and there is therefore only one globally available TLS store.

In the tls.certificates section, a list of stores can then be specified to indicate where the certificates should be stored:

# Dynamic configuration

tls:
  certificates:
    - certFile: /path/to/domain.cert
      keyFile: /path/to/domain.key
      stores:
        - default
    # Note that since no store is defined,
    # the certificate below will be stored in the `default` store.
    - certFile: /path/to/other-domain.cert
      keyFile: /path/to/other-domain.key
# Dynamic configuration

[[tls.certificates]]
  certFile = "/path/to/domain.cert"
  keyFile = "/path/to/domain.key"
  stores = ["default"]

[[tls.certificates]]
  # Note that since no store is defined,
  # the certificate below will be stored in the `default` store.
  certFile = "/path/to/other-domain.cert"
  keyFile = "/path/to/other-domain.key"

Restriction

The stores list will actually be ignored and automatically set to ["default"].

Default Certificate

Traefik can use a default certificate for connections without a SNI, or without a matching domain. This default certificate should be defined in a TLS store:

# Dynamic configuration

tls:
  stores:
    default:
      defaultCertificate:
        certFile: path/to/cert.crt
        keyFile: path/to/cert.key
# Dynamic configuration

[tls.stores]
  [tls.stores.default]
    [tls.stores.default.defaultCertificate]
      certFile = "path/to/cert.crt"
      keyFile  = "path/to/cert.key"
apiVersion: traefik.containo.us/v1alpha1
kind: TLSStore
metadata:
  name: default
  namespace: default

spec:
  defaultCertificate:
    secretName: default-certificate

---
apiVersion: v1
kind: Secret
metadata:
  name: default-certificate
  namespace: default

type: Opaque
data:
  tls.crt: LS0tLS1CRUdJTiBDRVJUSUZJQ0FURS0tLS0tCi0tLS0tRU5EIENFUlRJRklDQVRFLS0tLS0=
  tls.key: LS0tLS1CRUdJTiBQUklWQVRFIEtFWS0tLS0tCi0tLS0tRU5EIFBSSVZBVEUgS0VZLS0tLS0=

If no defaultCertificate is provided, Traefik will use the generated one.

ACME Default Certificate

You can configure Traefik to use an ACME provider (like Let's Encrypt) to generate the default certificate. The configuration to resolve the default certificate should be defined in a TLS store:

Precedence with the defaultGeneratedCert option

The defaultGeneratedCert definition takes precedence over the ACME default certificate configuration.

# Dynamic configuration

tls:
  stores:
    default:
      defaultGeneratedCert:
        resolver: myresolver
        domain:
          main: example.org
          sans:
            - foo.example.org
            - bar.example.org
# Dynamic configuration

[tls.stores]
  [tls.stores.default.defaultGeneratedCert]
    resolver = "myresolver"
    [tls.stores.default.defaultGeneratedCert.domain]
      main = "example.org"
      sans = ["foo.example.org", "bar.example.org"]
apiVersion: traefik.containo.us/v1alpha1
kind: TLSStore
metadata:
  name: default
  namespace: default

spec:
  defaultGeneratedCert:
    resolver: myresolver
    domain:
      main: example.org
      sans:
        - foo.example.org
        - bar.example.org
## Dynamic configuration
labels:
  - "traefik.tls.stores.default.defaultgeneratedcert.resolver=myresolver"
  - "traefik.tls.stores.default.defaultgeneratedcert.domain.main=example.org"
  - "traefik.tls.stores.default.defaultgeneratedcert.domain.sans=foo.example.org, bar.example.org"
labels: {
  "traefik.tls.stores.default.defaultgeneratedcert.resolver": "myresolver",
  "traefik.tls.stores.default.defaultgeneratedcert.domain.main": "example.org",
  "traefik.tls.stores.default.defaultgeneratedcert.domain.sans": "foo.example.org, bar.example.org",
}

TLS Options

The TLS options allow one to configure some parameters of the TLS connection.

'default' TLS Option

The default option is special. When no tls options are specified in a tls router, the default option is used.
When specifying the default option explicitly, make sure not to specify provider namespace as the default option does not have one.
Conversely, for cross-provider references, for example, when referencing the file provider from a docker label, you must specify the provider namespace, for example:
traefik.http.routers.myrouter.tls.options=myoptions@file

TLSOption in Kubernetes

When using the TLSOption resource in Kubernetes, one might setup a default set of options that, if not explicitly overwritten, should apply to all ingresses.
To achieve that, you'll have to create a TLSOption resource with the name default. There may exist only one TLSOption with the name default (across all namespaces) - otherwise they will be dropped.
To explicitly use a different TLSOption (and using the Kubernetes Ingress resources) you'll have to add an annotation to the Ingress in the following form: traefik.ingress.kubernetes.io/router.tls.options: <resource-namespace>-<resource-name>@kubernetescrd

Minimum TLS Version

# Dynamic configuration

tls:
  options:
    default:
      minVersion: VersionTLS12

    mintls13:
      minVersion: VersionTLS13
# Dynamic configuration

[tls.options]

  [tls.options.default]
    minVersion = "VersionTLS12"

  [tls.options.mintls13]
    minVersion = "VersionTLS13"
apiVersion: traefik.containo.us/v1alpha1
kind: TLSOption
metadata:
  name: default
  namespace: default

spec:
  minVersion: VersionTLS12

---
apiVersion: traefik.containo.us/v1alpha1
kind: TLSOption
metadata:
  name: mintls13
  namespace: default

spec:
  minVersion: VersionTLS13

Maximum TLS Version

We discourage the use of this setting to disable TLS1.3.

The recommended approach is to update the clients to support TLS1.3.

# Dynamic configuration

tls:
  options:
    default:
      maxVersion: VersionTLS13

    maxtls12:
      maxVersion: VersionTLS12
# Dynamic configuration

[tls.options]

  [tls.options.default]
    maxVersion = "VersionTLS13"

  [tls.options.maxtls12]
    maxVersion = "VersionTLS12"
apiVersion: traefik.containo.us/v1alpha1
kind: TLSOption
metadata:
  name: default
  namespace: default

spec:
  maxVersion: VersionTLS13

---
apiVersion: traefik.containo.us/v1alpha1
kind: TLSOption
metadata:
  name: maxtls12
  namespace: default

spec:
  maxVersion: VersionTLS12

Cipher Suites

See cipherSuites for more information.

# Dynamic configuration

tls:
  options:
    default:
      cipherSuites:
        - TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
# Dynamic configuration

[tls.options]
  [tls.options.default]
    cipherSuites = [
      "TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256"
    ]
apiVersion: traefik.containo.us/v1alpha1
kind: TLSOption
metadata:
  name: default
  namespace: default

spec:
  cipherSuites:
    - TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256

TLS 1.3

Cipher suites defined for TLS 1.2 and below cannot be used in TLS 1.3, and vice versa. (https://tools.ietf.org/html/rfc8446)
With TLS 1.3, the cipher suites are not configurable (all supported cipher suites are safe in this case). https://golang.org/doc/go1.12#tls_1_3

Curve Preferences

This option allows to set the preferred elliptic curves in a specific order.

The names of the curves defined by crypto (e.g. CurveP521) and the RFC defined names (e. g. secp521r1) can be used.

See CurveID for more information.

# Dynamic configuration

tls:
  options:
    default:
      curvePreferences:
        - CurveP521
        - CurveP384
# Dynamic configuration

[tls.options]
  [tls.options.default]
    curvePreferences = ["CurveP521", "CurveP384"]
apiVersion: traefik.containo.us/v1alpha1
kind: TLSOption
metadata:
  name: default
  namespace: default

spec:
  curvePreferences:
    - CurveP521
    - CurveP384

Strict SNI Checking

With strict SNI checking enabled, Traefik won't allow connections from clients that do not specify a server_name extension or don't match any of the configured certificates. The default certificate is irrelevant on that matter.

# Dynamic configuration

tls:
  options:
    default:
      sniStrict: true
# Dynamic configuration

[tls.options]
  [tls.options.default]
    sniStrict = true
apiVersion: traefik.containo.us/v1alpha1
kind: TLSOption
metadata:
  name: default
  namespace: default

spec:
  sniStrict: true

ALPN Protocols

Optional, Default="h2, http/1.1, acme-tls/1"

This option allows to specify the list of supported application level protocols for the TLS handshake, in order of preference. If the client supports ALPN, the selected protocol will be one from this list, and the connection will fail if there is no mutually supported protocol.

# Dynamic configuration

tls:
  options:
    default:
      alpnProtocols:
        - http/1.1
        - h2
# Dynamic configuration

[tls.options]
  [tls.options.default]
    alpnProtocols = ["http/1.1", "h2"]
apiVersion: traefik.containo.us/v1alpha1
kind: TLSOption
metadata:
  name: default
  namespace: default

spec:
  alpnProtocols:
    - http/1.1
    - h2

Client Authentication (mTLS)

Traefik supports mutual authentication, through the clientAuth section.

For authentication policies that require verification of the client certificate, the certificate authority for the certificate should be set in clientAuth.caFiles.

The clientAuth.clientAuthType option governs the behaviour as follows:

  • NoClientCert: disregards any client certificate.
  • RequestClientCert: asks for a certificate but proceeds anyway if none is provided.
  • RequireAnyClientCert: requires a certificate but does not verify if it is signed by a CA listed in clientAuth.caFiles.
  • VerifyClientCertIfGiven: if a certificate is provided, verifies if it is signed by a CA listed in clientAuth.caFiles. Otherwise proceeds without any certificate.
  • RequireAndVerifyClientCert: requires a certificate, which must be signed by a CA listed in clientAuth.caFiles.
# Dynamic configuration

tls:
  options:
    default:
      clientAuth:
        # in PEM format. each file can contain multiple CAs.
        caFiles:
          - tests/clientca1.crt
          - tests/clientca2.crt
        clientAuthType: RequireAndVerifyClientCert
# Dynamic configuration

[tls.options]
  [tls.options.default]
    [tls.options.default.clientAuth]
      # in PEM format. each file can contain multiple CAs.
      caFiles = ["tests/clientca1.crt", "tests/clientca2.crt"]
      clientAuthType = "RequireAndVerifyClientCert"
apiVersion: traefik.containo.us/v1alpha1
kind: TLSOption
metadata:
  name: default
  namespace: default

spec:
  clientAuth:
    # the CA certificate is extracted from key `tls.ca` or `ca.crt` of the given secrets.
    secretNames:
      - secretCA
    clientAuthType: RequireAndVerifyClientCert

Using Traefik for Business Applications?

If you are using Traefik for commercial applications, consider the Enterprise Edition. You can use it as your:

Traefik Enterprise enables centralized access management, distributed Let's Encrypt, and other advanced capabilities. Learn more in this 15-minute technical walkthrough.